Animal Feed Technical Articles

All

Article published the April 17, 2009:

Efficient grinding

With today's increasing emphasis on efficient use of energy and its effect on the environment, feed mill managers must take an objective look at their process systems in order to maximize output against power c...
Author/s :
-
Statistics:
2947 3
Article published the March 16, 2009:

Grain storage and spoilage prevention and control

The feed hygiene Regulation (EC) No 183/2005 presents a legal foundation for the production of safe feedstuffs. The regulation applies to primary production and puts the spotlight clearly on grain storage since...
Author/s :
Clementine Marien
Statistics:
3930 2
Article published the December 17, 2008:

Utilizing the Growing Local Supply of Distillers Grains

Across the Midwest, ethanol plants (primarily dry mill vs. wet mill process) are being planned and built and existing plants expanded. Today over 98 percent of commercially produced ethanol is used to extend ga...
Author/s :
-
Statistics:
2107 2
Article published the December 3, 2008:

Recent Trends in Gut Health Management

Global agriculture is heading towards challenging times, since the world's population continues to grow at an ever increasing rate. Thus, consumers' demand for sufficient supply of high-quality safe food is a m...
Author/s :
Tobias Steiner
Statistics:
2838 3
Article published the December 1, 2008:

Processing Feed Grains

Does Grain Need to be Processed?Although it is possible to feed whole grain to cattle, it is normally processed for a variety of reasons. Reduced separation and sorting of feed It is impossible to mix protein,...
Author/s :
-
Statistics:
2568 2
Article published the November 20, 2008:

Improving enzyme resistance to pelleting conditions

Numerous studies on growth and digestibility have demonstrated the benefits of non-starch polysaccharides (NSP) degrading enzymes in poultry and pigs, which have led to a wide adoption of feed enzymes in the fe...
Author/s :
-
Statistics:
3501 5
Article published the November 13, 2008:

Mill Automation & Process Optimization

Almost every miller in the world has considered introducing some degree of automation to the cleaning houses, mills and packing plants at some stage and many have been very successful. Sadly though, I also hear...
Author/s :
Tuti Tan
Statistics:
2631 1
Article published the October 15, 2008:

Sieves & Particle Size Reduction

The sifter floor tends to be out of sight and out of mind in many flour mills, getting attention only when the mill is stopped. But the sifter floor is just as important as the roller floor and proper sifter ma...
Author/s :
-
Statistics:
6279 3
Article published the October 14, 2008:

Silage inoculants: are they profitable? A case study of wholeplant corn silage

Research on the topic “Profitability in the use of silage inoculants”  in scientific literature shows that many authors (e.g. Vanzant, 2008; Raue, 2006) have already tried to use methods for calculating the eco...
Author/s :
Yunior, Acosta Aragon
Statistics:
1854 0
Article published the October 6, 2008:

The floating feed revolution

Tilapia is the second-most important group of farmed fish after carp. It is farmed in at least 85 countries, with the major part of the production coming from Asia (China) and Latin America (Ecuador, Honduras...
Author/s :
-
Statistics:
4596 5
 
 
   | 
Copyright © 1999-2019 Engormix - All Rights Reserved