Extrusion Technical Articles

Manufacturing and Machinery

Article published the August 1, 2016:

Low cost Medium Shear Extruder for pet food and aquafeed

This article was originally published in Aquafeed (2013), Vol. 5, No.3, 41-45.   The single screw extruder has been the heartbeat of dry pet food and aquatic feed for over 50 years. Today, the single scr...
Author/s :
Nabil W. Said
Statistics:
745 4
Article published the July 26, 2016:

MS3000 Medium Shear Extruder for Fish Feed Built Upon High Shear Technology and Aquatic Co-Products Recycling Experience

Originally published in Aquafeed In the autumn 2013 edition of Aquafeed, Dr. Nabil Said of Insta-Pro International discussed the new MS3000 Medium Shear Extruder for making high-quality, shaped, aquafeed pelle...
Author/s :
Dave Albin, Ph.D.
Statistics:
386 0
Article published the September 8, 2015:

Extrusion of Alternative Ingredients: An Environmental and a Nutritional Solution

Introduction The poultry industry represents an increasingly intensive operation supplying high quality protein in the form of eggs and meat. The efficiency of production has increased dramatically to meet t...
Author/s :
Nabil W. Said
Statistics:
325 0
Article published the October 21, 2013:

Extrusion of Texturized Proteins

Raw Materials Traditionally the most popular raw material for production of textured vegetable proteins in an extrusion system has been slightly toasted defatted soy flour. This defatted soy flour usually mee...
Author/s :
Galen Rokey Joseph P. Kearns
Statistics:
5497 1
Article published the September 11, 2013:

Maintaining Ingredient Quality in Extruded Feeds

Extrusion processing using a combination of moisture, pressure, temperature and mechanical shear, is been used in the feed industry. It results in physical and chemical changes such as ingredient particle size ...
Author/s :
Dr. Mian N.Riaz
Statistics:
5857 0
Article published the November 30, 2012:

Influence of the Die Design, Screw Speed and Filling Grade on Physical Properties, Processing Parameters and Output Rate of the Extruded Fish Feed

                                   
Author/s :
Dejan Miladinovic
Statistics:
701 0
Article published the May 27, 2011:

Rethinking swine starters: focus on novel processing techniques

Choosing specific processing technology can optimize conditions for best pig performance. Research has shown that technologies for pelleting feed differ in their effect on dietary performance. In Europe, pract...
Author/s :
Galen Rokey
Statistics:
2158 1
Article published the May 24, 2011:

Energy efficiency improving & pellet uniformity control in the extrusion of aquafeed

To substantially improve extruder performance in aquafeed production, in recent years Muyang Group made research efforts in five aspects and gained some achievements : to increase energy efficiency of extruder,...
Author/s :
-
Statistics:
1301 1
Article published the October 6, 2008:

The floating feed revolution

Tilapia is the second-most important group of farmed fish after carp. It is farmed in at least 85 countries, with the major part of the production coming from Asia (China) and Latin America (Ecuador, Honduras...
Author/s :
-
Statistics:
4684 5
Article published the June 8, 2007:

Improved animal performance through feed processing technology (Part 1)

It is well recognized that feed represents the most significant cost of animal production. Even with sheep, which typically consume more forage (as a percentage of their diet) than do other domestic species, fe...
Author/s :
-
Statistics:
15967 2
 
 
Copyright © 1999-2021 Engormix - All Rights Reserved