Explore all the information on
Feed processing and manufacturing
Welcome to the page about Feed processing and manufacturing of Engormix; a source of knowledge on Feed processing and manufacturing.
Anderson International Corp, inventor of the Expeller® press and continuous press process, will exhibit at the 2018 AOCS Annual Meeting & Expo, to be held May 6-9, 2018 at the Minneapolis Convention Center in Minneapolis, Minnesota, booth 700.
With an extensive technical program that includes more than 650 oral and poster presentations and more than 1,400 attendees, the 2018 AOCS Annual Meeting & Expo is a prime place for sharing ideas and...
Comments : 0
Recommendations: 1
Particle Size
Optimum particle size for best pelleting results has been a matter of controversy for almost as long as feeds have been pelleted. Young (1960) found no significant differences in pellet durability when he experimented with feed rations containing 40, 60, and 70 percent ground corn or grain sorghum when the grain portions were ground coarse, medium, and fine.
Martin (1984) compared pelleting efficiencies and durabilities using a hammermill and a roller mill to...
Comments : 1
Recommendations: 4
Shuang Hui Group is a large food group which focusing on meat processing, it is the largest meat processing basement in China. Luohe Shuang Hui Wan Zhong Poultry Co., Ltd is a subsidiary company of Luohe Shuang Hui, mainly providing feed for Shuang Hui. The cooperation of high grade poultry feed project with 300,000-ton per year between...
Comments : 1
Recommendations: 1
In September 2017, the latest livestock and poultry feed and steel silo project in Uzbekistan constructed by ZHENG CHANG were successfully completed and put into operation. ZHENG CHANG achieved the second cooperation with customers, with high-quality products and services, to create high standard of feed engineering for customers.
...
Comments : 1
Recommendations: 1
.jpg&w=3840&q=75)
Introduction Nursery pigs often experience a lag in growth performance when transitioning from sows’ milk to dry feed during weaning. The lag is caused by several factors, including the dietary and environmental stresses associated with weaning. This post-weaning challenge can be associated with suppressed performance, diarrhea, and other intestinal health problems. While compensatory gain may occur as pigs become accustomed to solid feed, previous stresses may diminish...
Comments : 0
Recommendations: 0
.jpg&w=3840&q=75)
Josef Barbi, President of E.S.E. & Intec, highlights the main points of his lecture "Drying and Cooling of Aqua Feed", focusing on the new tendencies of Technologies of manufacturing aquafeed, at the Aquafeed Extrusion course, which took place in the United Arab Emirates, during VIV MEA 2018...
Comments : 0
Recommendations: 1
.jpg&w=3840&q=75)
The Countdown has begun. In October 2018, Zheng Chang will celebrate its 100 years. Jane Shen, Marketing Director, talks to us about this important date for this company....
Comments : 0
Recommendations: 2
In August 2017, ZHENG CHANG group cooperated with zhenghong group for the third time. ZHENG CHANG used patented 338 maturing piglet process to build a harvest production line with happiness.
Zhenghong group is the earliest restructuring and listing...
Comments : 2
Recommendations: 1
Corn oil, as a product of the wet corn milling industry, represents a very small part of the total industry output but, nevertheless, constitutes an important part of that output by virtue of the relative value of the product. In many wet...
Comments : 1
Recommendations: 0
Feed is too expensive to waste, so pellet quality has an economic value. There are a number of excellent methods to objectively measure and record the quality of pellets during the manufacturing process. This is the first step toward correcting destructive conditions and improving quality. Compound feed quality should be assessed by at least four different groups of characteristics: physiological characteristics, hygiene standards, environmental compatibility and technical...
Comments : 12
Recommendations: 1
Pelleting has been, and continues to be, a popular processing technique in feed manufacturing. In basic terms, pelleting converts a finely ground blend of ingredients into dense, free flowing agglomerates (pellets). There are many reasons used to justify the process, but it may be appropriate to list just a few: - improved animal performance, - decreased feed wastage, - reduced selective feeding, - improved bulk density, - better material handling...
Comments : 2
Recommendations: 2
Introduction The United States swine industry has suffered dramatic losses following the emergence of porcine epidemic diarrhea virus (PEDV) in May 2013. The virus is a highly contagious and deadly coronavirus that was only observed in Asian and European swine herds prior to 2013. Due to the high mortality rates (80±100%) in neonates, significant economic losses have been experienced [1, 2]. Traditionally, transmission of PEDV occurs through the fecal-oral route within a...
Comments : 0
Recommendations: 0
Anderson has over 125 years of experience in oilseed processing. The Expeller® Press is specifically engineered for soybean and other seed oil extraction, with proven lower operating and maintenance cost, and the 12" DOX™ Extruder is the largest dry extruder for soybean on the market. D ownload the information brochure of these products ...
Comments : 2
Recommendations: 2
From January 30th to February 1st, 2018, the XXIII International Industrial Trade Fair “MVC: Cereals – Mixed Feed – Veterinary - 2018” will take place in Pavilion N° 75 at the Exhibition of National Economy Achievements (VDNH) in Moscow, Russia. The International Grain Forum will be organized...
Comments : 0
Recommendations: 2
.jpg&w=3840&q=75)
Josef Barbi, President of E.S.E. & INTEC, and Bulent T. Helvacikara, International Sales Director, share with Engormix their point of view about the continuous growth of the animal feed industry in these regions and the products and services this company offers focused on Processing Equipment, Systems, Technologies & Complete Plant Design...
Comments : 0
Recommendations: 1
.jpg&w=3840&q=75)
Jerry Cheng, Department Manager International for ZhengChang, talks about the performance of the company in Latinamerica, specialized in creating Feed machinery Equipment, during the Latin American Poultry Congress 2017, in Guadalajara, México.
...
Comments : 0
Recommendations: 1
Adding the proper amount of liquid raw material into the feed has become a convenient, flexible and effective way, which has been widely used in feed manufacturer. Through adding liquid, it can not only improve the feed’s energy level, but also can ensure the active ingredient in feeds to get fully utilized. Moreover, it can also improve the pellet feeds’ appearance quality and palatability in a large extent. Therefore, animals’ feed intake can...
Comments : 0
Recommendations: 0
What can we do to keep feed from being contaminated by Salmonella, increase the laying rate of hens, improve the quality of eggs, and produce raw eggs without causing foodborne Salmonella infection in humans? Only starting from the food source, speeding up the upgrading of feed processing equipment, eliminating Salmonella to the greatest extent, reducing the cost from the source and improving the egg quality. ...
Comments : 0
Recommendations: 1
How to clean 0.6-1.0 mm die, in a effective way?
If anyone having any practical experience or any solution or any specific mechanism.
It will help us a lot....
Comments : 0
Recommendations: 0
.jpg&w=3840&q=75)
Hao Yun, President of ZhengChang Group, talks about the trajectory of Zheng Chang Group from China. Zhengchang, established in 1918, has made constant innovations in feed machinery industry and accumulated a wealth of experience in tackling the various challenges facing feed companies and, more importantly, is able to offer a range of comprehensive solutions. Zhengchang has now evolved into China’s largest manufacture of feed machinery...
Comments : 1
Recommendations: 0
