William Goh likes the comment:
Another suggestion for PPLA is:
1) The DRUM COATER of the feed zone packaging system should be installed directly above the SURGE HOPPER of the packaging machine.
2) The bulk loading area should be installed under the bulk bin.
The reason is to reduce the generation of pellet powder. And to get rid of pollution.
THANKS, CHOI
William Goh likes the comment:
My suggestion is also highly recommended for post-pellet liquid application. However, when applying PPLA, DRUM COATER must be selected when selecting the coating machine. The reason is to reduce the generation of powder.This is because other COATING MACHINE, PADDLE TYPE or RIBBON TYPE increases PELLET powder.THANKS, CHOI.
Participation in Forum on May 1, 2021
Personally, I feel feed millers and formulators should consider maximising their use of different liquid additives into mixers as much as possible which is long known to contribute to positive effects on PDI and pellet mill energy consumption. At the same time, optimizing the use of PPLA for heat sensitive liquid additives, such as enzyme, as well as Fats, and other palatable liquid additives. Liq ...
William Goh likes the comment:
For me, the particle size of raw materials is very important when producing pellets. Also, the pellet size is very important.
So, I propose as follows.
1. The blending ratio must also be good.
2, the combination should also be good. (My suggestion is that the CV should be less than 4.)
3. The particle size should be less than 700 microns for all raw materials. For Grinding, a 2.4 mm screen for ...
William Goh likes this technical article:
The production of pelleted feed is a complex and expensive activity. Optimising the manufacturing process is therefore important to maintain production profitability, making it necessary to collect all relevant data along the processing chain. It is also essential to understand the parameters that affect the pelleting process. Evaluation needs to address three key factors: pellet quality, animal p ...
This member had joined Engormix
April 5, 2019