Discussion created on 06/12/2019

How to use the newly bought flat die machine?

Grinding. Grinding must be carried out reasonably and fully before using the new flat die machine (or replacing a new set of abrasive tools). The grinding method of the test machine is: generally, 5 kg of bran, 5 kg of engine oil, and 25 kg of fine river sand are mixed and put into the machine, and the raw materials are put into normal production after repeated extrusion for nearly 60 minutes. The finished granules prepared by grinding have smooth surface, no cracks, no granules, internal maturation, increase digestion and absorption of feed nutrients, improve production efficiency and greatly reduce the working intensity of farmers.

remove_red_eye 4 forum 0 bar_chart Statistics share print
Share :
close
Would you like to discuss about this topic: How to use the newly bought flat die machine??
Engormix reserves the right to delete and/or modify comments. See more details
Post a comment
Create new discussion :
If this discussion does not cover topics of interest or raises new questions, you can create another discussion.
Consult a professional in private:
If you have a specific problem you can perform a consultation privately to a professional in our community.
Kurt A. Rosentrater
Kurt A. Rosentrater
Associate Professor
  Ames, Iowa, United States
Professional Services
Kurt A. Rosentrater Kurt A. Rosentrater
Ames, Iowa, United States
Giuseppe R. Bigliani Giuseppe R. Bigliani
Cumming, Georgia, United States
Dave Albin, Ph.D. Dave Albin, Ph.D.
Grimes, Iowa, Estados Unidos de América
Royce Samford Royce Samford
Stanfield, Arizona, United States
 
   | 
Copyright © 1999-2019 Engormix - All Rights Reserved