Technical Paper Thermo Pro (E.S.E Intec)

The E.S.E. Thermo-Pro was originally developed, manufactured, tested, and operated during 1986 to 1989 by our group of companies, along with a major commodities trading firm and a competent laboratory.

This most unique, modular, simplified and controlled fluidized bed technology-using super-heated, dry, clean, and pressurized air (no flame-product contact) for uniform and economical drying, toasting, cooking, etc, of a large variety of products and materials has revolutionized the industry.

The unit's wide processing (from 1º to 10 W.C.) air pressure at 150F to 625F (65C to 329C) temperature, with variable product depth and variable retention time, allows for uniform, clean, and high quality final products, and for multi-purpose applications with one and the same machine.

 

 

THERMO-PRO is a modern technology that makes heat processing of a variety of free-flowing materials simple, practical and profitable.

Natural gas, propane, diesel fuel, solid or alternative fuels, in an efficient burner super -heats air which passes through the exclusive fluid bed JET FLOOR of the product chamber. The product is gently floated and turned in a fluid bath of hot air without contact to flame, while its retention is positively controlled by a variable speed internal flow system. The fluidized bed of product is gently, thoroughly, and evenly heated to a consistent and uniform finish. Product depth is controlled via a variable speed rotating inlet feeder.

There are no over-cooked or under-cooked results when the accurate temperature control system is employed. The high velocity air stream creates proper turbulence in the product which is simultaneously removes light foreign material and dust that is directed to the cyclone collector. The product is discharged through a rotating discharge Air Lock to avoid heat loss.