Explore
Communities in English
Advertise on Engormix

Water requirements of poultry

Published: August 4, 2021
By: Dr. Jacquie Jacob, University of Kentucky
Water is a critical but often overlooked nutrient. Animals can survive longer without food than they can without water. Water is involved in every aspect of animal metabolism. It plays an important role in the regulation of body temperature, digesting food, and eliminating wastes. At normal temperatures, water consumption can double or quadruple. To remain healthy, poultry flocks require water of adequate quality and quantity.
 
Color, Taste, and Odor
It is important that drinking water be clear, tasteless, odorless, and colorless. Water that is contaminated exhibits different characteristics depending on the contaminants.
  • The presence of particles such as clay, silt, or organic material can make the water cloudy. Such water can interfere with the proper operation of watering equipment and can indirectly lead to adverse effects on flock performance.
  • Water that is reddish-brown might contain excess iron.
  • A blue hue to water can be an indication of excess copper.
  • A rotten egg smell is an indication of hydrogen sulfide in water. Hydrogen sulfide may also combine with iron to form black water (iron sulfide), which can also indicate the presence of sulfate-reducing bacteria.
  • The taste of water can be affected by the presence of different salts. A bitter taste, for example, is associated with the presence of ferrous and manganese sulfates.
 
Bacteria
Bacteria in the water can be an indication of contamination by organic material. Water is normally tested for total bacteria level as well as coliform bacteria level. The presence of coliform bacteria is typically an indication of fecal contamination. If water has a high bacterial count, the best option is to eliminate the source of the contamination or to locate an alternative water source. It is not advisable to use disinfectants to maintain safe bacterial levels in a highly contaminated water source. Any disinfectant is likely to fail at some time and expose the birds to high levels of bacteria.
 
Physical and Chemical Characteristics
The acidity or alkalinity of water is expressed as pH level. A scale from 0 to 14 is used to measure pH. Neutral water, which is neither acidic or alkaline, has a pH of 7. Water with a pH lower than 7 is acidic, and water with a pH higher than 7 is alkaline. Acidic drinking water can affect digestion, corrode watering equipment, and impair the use of water-soluble vaccines and medications. Poultry prefer water with a pH of 6.0 to 6.8 but can tolerate a pH range of 4 to 8. However, water with a pH of less than 6 has been shown to negatively affect chicken performance. When provided water with a pH above 8, chickens might reduce their water consumption. This, in turn, will affect feed consumption and bird performance.
Hardness refers to the amount of dissolved minerals, such as calcium and magnesium, in water. Hard water has high levels of these minerals and can cause the buildup of sludge in water lines. Hardness reduces the effectiveness of soaps and disinfectants and interferes with the administration of some medications. Although hard water can cause stains and adversely affect water equipment, hard water has not be shown to have either a positive or negative effect on poultry production.
 
Mineral Content
A large number of minerals occur naturally in water. They are usually present in amounts that do not interfere with the metabolism of digestive functions of poultry. When the levels of certain minerals are out of balance, however, poultry performance can be adversely affected.
 
Nitrates and nitrites
Nitrogen contamination of water usually occurs in the form of nitrates and nitrites. Nitrate (NO3) is produced during the decomposition of organic matter. Nitrite (NO2) is produced during intermediate stages of the decomposition of organic compounds. The presence of nitrates and/or nitrites in water usually indicates that the water is contaminated by runoff containing fertilizer or animal wastes. Nitrates are soluble and may move with surface runoff or leach into the groundwater by percolation through the soil. Nitrate itself is not toxic, but after consumption, microorganisms found in the digestive tract convert nitrate to the more toxic form of nitrite. Once nitrite is absorbed into the bloodstream, it binds strongly with hemoglobin (which normally carries oxygen) and reduces the oxygen carry capacity of the blood. Long-term nitrate and/or nitrite toxicity results in poor growth, decreased feed consumption, and poor coordination.
 
Sulfate (SO4)
In the presence of magnesium or sodium, high sulfate levels have a laxative effect. Levels as low as 50 mg.L can have a negative effect on flock performance if either the sodium or magnesium level is also 50 mg/L. High levels of sulfate may also interfere with intestinal absorption of other minerals such as copper.
 
Phosphate (PO4)
High levels of phosphate may indicate water contamination from sewage.
 
Sodium (Na)
Excessive levels of sodium have a diuretic effect. The normal sodium level is about 32 mg/L. Levels above 50 mg/L, together with high levels of sulfate or chloride, have been shown to adversely affect flock performance. High levels of sodium also increase water consumption and litter moisture. This can have an adverse effect on air quality in the poultry house.
 
Chloride (Cl)
Excessive levels of chloride have been shown to adversely affect metabolism. A normal chloride level is 14 mg/L. Levels above 14 mg/L, combined with a level of 50 mg/L of sodium, are detrimental to flock performance. Poultry can tolerate chloride levels as high as 25 mg/L as long as the sodium level is in the normal range. High levels of chloride increase water consumption and litter moisture.
 
Magnesium (Mg)
The normal level of magnesium in water is about 14 mg/L. Poultry that consume water containing high levels of magnesium have loose droppings. Magnesium may interfere with sulfate, and it is in the presence of high sulfate levels that magnesium levels are a concern. Levels as high as 68 mg/L have not been shown to adversely affect production when sulfate levels are normal. A level of 50 mg/L of magnesium in combination with a sulfate level of more than 50 mg/L will adversely affect flock performance.
 
Manganese (Mn)
Excessive levels of manganese can result in an off flavor, reducing water consumption.
 
Copper (Cu)
In combination with phosphorus, copper plays a role in bone development. Ruminants are more susceptible to copper toxicity than poultry. Too much copper can give the water a bitter taste and might cause liver damage. Problems with copper can occur when dietary molybdenum is either excessive or deficient.
 
Calcium (Ca)
Calcium does not appear to have a negative effect, even at levels as high as 400 mg/L.
 
Iron (Fe)
High levels of iron, up to 25 mg/L, have not been shown to adversely affect flock performance, but they will stain waterers. High iron levels may encourage the growth of bacteria that can lead to diarrhea. When iron in the ferrous form is exposed to air, it is converted to ferric hydroxide, which gives water the typical rusty color.
 
This article was originally published on https://poultry.extension.org/.
Related topics
Authors:
Jacquie Jacob
University of Kentucky
Follow
Join to be able to comment.
Once you join Engormix, you will be able to participate in all content and forums.
* Required information
Would you like to discuss another topic? Create a new post to engage with experts in the community.
Create a post
Dr.m.s.swami
14 de noviembre de 2021
Sir thank you for informative and helpful information. Regards
Join Engormix and be part of the largest agribusiness social network in the world.
LoginRegister