engormix
search
search
We will be present at:
September 9, 2019 to September 12, 2019
Belo Horizonte, Minas Gerais, Brazil

How do I decide which mold inhibitor should be included in my feeds

Published on: 12/16/2015
Author/s :

There are many mold inhibitor brands in the feed additives market which claim to work better than all others. However, not all of them are as efficient as suppliers might claim. What should you look for when selecting a product ?

A common recommendation in the market is to include a dosage rate of 1 Kg/Mt. However, the various products available may contain different concentrations of the active ingredient, like for example propionic acid in its different forms (calcium propionate, ammonium propionate). Secondly, how can a product containing 10% of the active ingredient be as efficient as another brand containing 50% of the same active ingredient? It gets even more complicated if we compare products with different forms of the active ingredient or products that containing other acices with mold inhibitor characteristics besides propionic acid. Another problem which complicates the correct dosage recommendation for a mold inhibitor product is the fact that finished feeds may contain different total moisture content, or variations occurs in relative humidity, temperature, physical structure (pelleted, mash) or water activity (Aw). Last, but not least, you will want to consider also the shelf life for the feed to be protected against mold growth.

Nutriad offers a practical test in order to compare different mold inhibitors under the same controlled conditions. The Mold Inhibitor Efficacy Test: CO2 procedure allows a qualification & quantification of the efficacy of a mold inhibitor in feed. Mold activity is evaluated by measuring the CO2 concentration in the head space of the jars. The test can be performed in any quality assurance lab with basic equipment, having at least a balance with a 0.1 g accuracy. The rest of the equipment (Plastic jars of 500/1000 ml with lids equipped for CO2 measurements, portable pump specific for CO2 detection tubes, and drägger CO2 detection tubes) will be supplied by Nutriad. Depending on the feed, and shelf life goal, measurements may be taken every week or maybe every other week during one to three months, and results of the tests will be plotted in a graph.  Complete methodology, and training to use the equipment will also be provided by Nutriad.

Through years of experience the Mold Inhibitor Efficacy test has proven to be a practical tool to numerically evaluate if a product will really protect your feed against mold growth.

Nutriad offers MOLD-NILTM DRY as an effective product to protect against mold growth in finished feeds. Nutriad will help you to discover how to get the best out of the use of our mold inhibitor by offering you this kind of technical service and the knowledge of our local experts.

MOLD-NILTM DRY ADVENTAGES:

  • Broad spectrum of activity
  • Control of molds and yeasts
  • Extends shelf life
  • Long term activity
  • Non agressive
  • Non dusty (MOLD-NILTM DRY)
 
remove_red_eye 541 forum 0 bar_chart Statistics share print
Share :
close
See all comments