/  
  /  

Feed Processing & Manufacturing Forums

Here you can generate a discussion about the daily development of their work, make questions and / or share your experiences.
Last comment: February 28, 2017
(7) (1)
Dear sir In my plant, Andritz pellet mill 60 tph , the die was not freely rotate by hand when the machine was stopped,(The main bearing changed 3 months back, main motor amps normal, out put also good...
Last comment: June 28, 2016
(506) (0)
Hi friends, Has anybody used pelletted alfalfa in their dairy cattle rations. If I have chance I want to use it. But I have doubts because of the particular size of the TMR. If I use the alfalfa pell...
Last comment: June 16, 2016
(2122) (10)
Last comment: December 30, 2015
(58) (2)
Dear Users, This is an interesting forum from our Spanish community, generated by Dalibor Atlagich from Chile: Dear Friends: I work in a food factory for salmon and my question is: Is there ...
Last comment: July 6, 2015
(418) (0)
I´m the General Manager of Fafan Agricultural and Livestock Cooperative. Our cooperative is seeking an advice on how to build cattle feed plant with capacity of 10t/h. So I would like some advic...
Last comment: April 12, 2015
(102) (0)
What is your opinion about using expander and pelletization for processing poultry feed? Do you know some data about improving FRC , DWG , mortality? How you administrate enzymes in feed if you have ...
Last comment: March 4, 2015
(613) (17)
Last comment: January 19, 2015
(113) (0)
Last comment: October 20, 2014
(1619) (1)
Last comment: February 12, 2014
(2599) (3)
In a recently acquired animal premix plant (manufacturing form 0.1% to 2.5% inclusion rate premixes) with standard silos, screw dosing and in process weighing followed by pneumatic transfer to a mixer...
Last comment: June 20, 2013
(1267) (12)
Last comment: June 5, 2011
(278) (0)
Thrust Ball Bearings are seat ring, bearing ring and steel roller retain. seat ring, bearing ring and the rollers is separated and simple to assemble and disassemble. According to the situation of acc...
Last comment: October 17, 2010
(288) (0)
Dear Users, This is an interesting forum from our Spanish community, generated by Joel Gonzalez Jimenez from Chile: Today we add water, salt zap methionine and separate the process of mixing of fo...
Last comment: August 7, 2010
(730) (3)
Bonjour, I work in a feed factory and we are producing feed for shrimp. There’s a remaining of the finished product, resulting from the previous cycle. Its general characteristics are: micro pellet d...
Last comment: January 5, 2010
(849) (2)
Good day, Which is the best way of determining the grade of starch gelatination during the conditioning? I’m aware that it’s done in an analytical lab, but is there another way (tables, organoleptic...
Last comment: December 18, 2009
(1602) (2)
I am a student. Why Expanding? What is an Expander? And that in the Feed mill?...
Last comment: January 31, 2009
(1063) (1)
Rising costs of raw materials increases the demand for product optimization and yields. Now, the means of accurately controlling the moisture content within a batch flow process has been finally breac...
Last comment: January 6, 2009
(2299) (2)
Polymers cost 1/3 less than metals and outperforms metals in many aggressive environments. They weigh much less than metals and have same strengths as metals. These new Polymers are stable up to 300 C...
Last comment: August 16, 2006
(1219) (0)
1
   | 
Copyright © 1999-2017 Engormix - All Rights Reserved