pellet feed mill

Forum: Correct usage and maintenance of a ring die

Published on: 08/17/2010
Rating:
Author : Wang Chao, Muyang Group
As a critical part of a pellet feed mill, the ring die is not only directly related to pellet quality, but also to the maintenance cost of a feed mill. According to statistics, the cost of wear and tear of ring dies usually counts for 25% of the plant’s total maintenance expenses. As a result, it seems prudent to offer direction and instruction on the correct usage and maintenanc...
View the full article
Comments : (3)
Post a comment
Tehran, Tehran, Iran
Animal Nutritionist
Re: Forum: Correct usage and maintenance of a ring die
08/18/2010 | thanks to author
this paper contains good practical and usefull points.
(0)
(0)
Lahore, Punjab, Pakistan
Animal Nutritionist
Re: Forum: Correct usage and maintenance of a ring die
08/18/2010 | The article Correct usage and maintainance of a ring die
by Mr. Wang Chao, Muyang Group is an interesting for the feed manufacturing practices. the author deeply narrate the Roller gap and Die maintenance . I will be highly obliged if the author throws light on the die maintanance for the following points:
As the life of a die with the passage of time deteriorates with metal traps and grooves on the surface ,
at what stage we should grind the surface of die
whether it depends upon number of bags produced by the die or thickness of die
normally when the thickness of die reaches at 35 mm then it was broken into pieces
(0)
(0)
Neyshabour, Khorasan, Iran
Student of professional technicians production
Re: Forum: Correct usage and maintenance of a ring die
04/17/2011 | You Friend Thank you for sending this article helpful
(0)
(0)
Would you like to discuss about this topic: Forum: Correct usage and maintenance of a ring die?
Post a comment
Already a member?
login
Don´t belong to the community?
CREATE MY ACCOUNT
 
 
 
More info about: 
Video
New micro-ingredients dosification and weighting system technology (E.S.E. & Int...
Date: 
09 Nov 2012
Reproductions: 
448
  
Technical article
Feed Mill Efficiency
"You cannot improve what you do not control. You cannot control what you do not...
Publication date: 
5/8/2012
  
Forum
Duygu Ekin
Publication date: 
8/20/2010
  
News
Muyang Turnkey Project in Saudi Arabia
The Rashied Al Balllaa Establishments in Saudi Arabia is a successful Muyang ov...
Publication date: 
7/20/2011
  
Forum
Publication date: 
7/24/2008
Copyright © 1999-2013
Engormix.com - All Rights Reserved
Engormix.com    Who are we?  │  What we sell?  │  Site statistics  │  Our news
engormix.com
 
Home   -  Forums   -  Technical Articles   -  Professionals Guide   -  News   -  Events   -  Companies and Products   -  Thematic Index   -  Videos   -  Photos
   
  United States    English Community  
STF Send to a friend
You are sending the forum:
Forum: Correct usage and maintenance of a ring die
From: (Enter your e-mail address)
To:
To send to more than one address, use semicolons between one and another.
Comments: